Catalogue Numbers for GORE® VIABAHN® Endoprosthesis – Singapore, Thailand
Catalogue Number | Endoprosthesis Labeled Diameter† (mm) | Endoprosthesis Length† (cm) | Catheter Length‡ (cm) | Recommended Vessel Diameter§ (mm) | Device Profile (Fr) | Recommended Balloon Diameter for Device Touch-upII (mm) |
---|---|---|---|---|---|---|
VBHR090502W | 9 | 5 | 120 | 7.6 – 8.5 | 8 | 9 |
VBHR091002W | 9 | 10 | 120 | 7.6 – 8.5 | 8 | 9 |
VBHR091502W | 9 | 15 | 120 | 7.6 – 8.5 | 8 | 9 |
VBHR100502W | 10 | 5 | 120 | 8.6 – 9.5 | 8 | 10 |
VBHR101002W | 10 | 10 | 120 | 8.6 – 9.5 | 8 | 10 |
VBHR101502W | 10 | 15 | 120 | 8.6 – 9.5 | 8 | 10 |
VBHR110502W | 11 | 5 | 120 | 9.6 – 10.5 | 10 | 12 |
VBHR111002W | 11 | 10 | 120 | 9.6 – 10.5 | 10 | 12 |
VBHR130502W | 13 | 5 | 120 | 10.6 – 12 | 10¶ | 14 |
VBHR131002W | 13 | 10 | 120 | 10.6 – 12 | 10¶ | 14 |
Catalogue Number | Endoprosthesis Labeled Diameter† (mm) | Endoprosthesis Length† (cm) | Catheter Length‡ (cm) | Recommended Vessel Diameter§ (mm) | Device Profile (Fr) | Recommended Balloon Diameter for Device Touch-up (mm) |
---|---|---|---|---|---|---|
VBJR050502W | 5 | 5 | 120 | 4.0 – 4.7 | 6 | 5 |
VBJR051002W | 5 | 10 | 120 | 4.0 – 4.7 | 6 | 5 |
VBJR051502W | 5 | 15 | 120 | 4.0 – 4.7 | 6 | 5 |
VBJR060502W | 6 | 5 | 120 | 4.8 – 5.5 | 6 | 6 |
VBJR061002W | 6 | 10 | 120 | 4.8 – 5.5 | 6 | 6 |
VBJR061502W | 6 | 15 | 120 | 4.8 – 5.5 | 6 | 6 |
VBJR070502W | 7 | 5 | 120 | 5.6 – 6.5 | 7 | 7 |
VBJR071002W | 7 | 10 | 120 | 5.6 – 6.5 | 7 | 7 |
VBJR071502W | 7 | 15 | 120 | 5.6 – 6.5 | 7 | 7 |
VBJR080502W | 8 | 5 | 120 | 6.6 – 7.5 | 7 | 8 |
VBJR081002W | 8 | 10 | 120 | 6.6 – 7.5 | 7 | 8 |
VBJR081502W | 8 | 15 | 120 | 6.6 – 7.5 | 7 | 8 |
* As used by Gore, Heparin Bioactive Surface refers to Gore's proprietary CBAS Heparin Surface.
† Labeled device diameters and lengths are nominal.
‡ Ensure the guidewire is the appropriate size (see Instructions for Use) and has a length at least twice that of the delivery catheter.
§ Recommended endoprosthesis compression within the vessel is approximately 5 - 20%.
II For the 11 and 13 mm diameter devices, balloon inflation pressure should not exceed 8 atm.
¶ The 13 mm diameter device is not compatible with the 10 Fr COOK® FLEXOR® CHECK-FLO® Introducer.