Catalogue Numbers for GORE® PROPATEN® Vascular Graft
Standard-walled | ||
|---|---|---|
| Catalogue Number | Internal Diameter (mm) | Standard Length (cm) |
| H050060A | 5 | 60 |
| H060010A | 6 | 10 |
| H060040A | 6 | 40 |
| H060060A | 6 | 60 |
| H060080A | 6 | 80 |
| H080060A | 8 | 60 |
| H080040A | 8 | 40 |
| H080080A | 8 | 80 |
| H460045A* | 4–6 | 45 |
| H470045A* | 4–7 | 45 |
| H470080A* | 4–7 | 80 |
* Tapered
Standard-walled, Fixed Ringed | |||
|---|---|---|---|
| Catalogue Number | Internal Diameter (mm) | Ringed Section Length (cm) | Standard Length (cm) |
| HR060545A | 6 | 5 | 45 |
Standard-walled, Integrated Rings | |||
|---|---|---|---|
| Catalogue Number | Internal Diameter (mm) | Radial Supported Length (cm) | Standard Length (cm) |
| IRH060520A | 6 | 5 | 20 |
| IRH060545A | 6 | 5 | 45 |
| IRH061020A | 6 | 10 | 20 |
| IRH064040A | 6 | 40 | 40 |
| IRH463845A* | 4–6 | 38 | 45 |
| IRH473845A* | 4–7 | 38 | 45 |
* Tapered
Standard-walled, Axillobifemoral, Removable Ringed | |||
|---|---|---|---|
| Catalogue Number | Internal Diameter (mm) | Ringed Section Length (cm) | Standard Length (cm) |
| HAX01A | 8x8 | Fully Ringed | 70x40 |
| HAX02A | 8x8 | Fully Ringed | 90x40 |
Thin-walled | ||
|---|---|---|
| Catalogue Number | Internal Diameter (mm) | Standard Length (cm) |
| HT060040A | 6 | 40 |
| HT060080A | 6 | 80 |
| HT070040A | 7 | 40 |
| HT070080A | 7 | 80 |
| HT080040A | 8 | 40 |
| HT080080A | 8 | 80 |
Thin-walled Removable Ringed | |||
|---|---|---|---|
| Catalogue Number | Internal Diameter (mm) | Ringed Section Length (cm) | Standard Length (cm) |
| HT057090A | 5 | 70 | 90 |
| HT063070A | 6 | 30 | 70 |
| HT064050A | 6 | 40 | 50 |
| HT066070A | 6 | 60 | 70 |
| HT066080A | 6 | 60 | 80 |
| HT067090A | 6 | 70 | 90 |
| HT074050A | 7 | 40 | 50 |
| HT076080A | 7 | 60 | 80 |
| HT083040A | 8 | 30 | 40 |
| HT084050A | 8 | 40 | 50 |
| HT087080A | 8 | 70 | 80 |
| HT087090A | 8 | 70 | 90 |
Thin-walled, Integrated Rings | |||
|---|---|---|---|
| Catalogue Number | Internal Diameter (mm) | Ringed Section Length (cm) | Standard Length (cm) |
| IRTH064040A | 6 | 40 | 40 |
| IRTH066060A | 6 | 60 | 60 |
| IRTH068080A | 6 | 80 | 80 |
| IRTH074040A | 7 | 40 | 40 |
| IRTH076060A | 7 | 60 | 60 |
| IRTH078080A | 7 | 80 | 80 |
| IRTH084040A | 8 | 40 | 40 |
| IRTH086060A | 8 | 60 | 60 |
| IRTH088080A | 8 | 80 | 80 |
Sizing, availability and pricing varies by country.
Please check with your Gore representative for availability.
Refer to Instructions for Use at eifu.goremedical.com for a complete description of all applicable indications, warnings, precautions and contraindications for the markets where this product is available. RXOnly
INDICATIONS FOR USE: GORE® PROPATEN® Vascular Graft is intended for use as vascular prostheses for replacement or bypass of diseased vessels in patients suffering occlusive or aneurysmal diseases, in trauma patients requiring vascular replacement, for dialysis access, or for other vascular procedures.
CONTRAINDICATIONS: DO NOT use the GORE® PROPATEN® Vascular Graft in patients with known hypersensitivity to heparin, including those patients who have had a previous incidence of Heparin-Induced Thrombocytopenia (HIT) type II.
DO NOT use any of the below configurations of GORE® PROPATEN® Vascular Graft for coronary artery bypass or cerebral reconstruction procedures:
- GORE® PROPATEN® Vascular Graft Integrated Rings
- GORE® PROPATEN® Vascular Graft Fixed Ring
- GORE® PROPATEN® Vascular Graft Removable Ring
- GORE® PROPATEN® Vascular Graft Removable Ring Axillobifemoral
DO NOT use GORE® PROPATEN® Vascular Graft as a patch. If cut and used as a patch, GORE® PROPATEN® Vascular Graft may lack adequate transverse strength.
FOR PATCHING APPLICATIONS: For cardiovascular procedures requiring patch materials, use the appropriate GORE® ACUSEAL Cardiovascular Patch.