Catalogue Numbers for GORE® EXCLUDER® AAA Endoprosthesis

Trunk - Ipsilateral Leg Endoprosthesis
GORE® C3® Delivery System Catalogue Number	Aortic Endoprosthesis Diameter (mm)	Iliac Endoprosthesis Diameter (mm)	Endoprosthesis Length (cm)
RLT231218	23	12	18
RLT231412	23	14.5	12
RLT231414	23	14.5	14
RLT231416	23	14.5	16
RLT231418	23	14.5	18
RLT261218	26	12	18
RLT261412	26	14.5	12
RLT261414	26	14.5	14
RLT261416	26	14.5	16
RLT261418	26	14.5	18
RLT281218	28.5	12	18
RLT281412	28.5	14.5	12
RLT281414	28.5	14.5	14
RLT281416	28.5	14.5	16
RLT281418	28.5	14.5	18
RLT311413	31	14.5	13
RLT311415	31	14.5	15
RLT311417	31	14.5	17
RLT351414	35	14.5	14

Contralateral Leg Endoprosthesis*
Catalogue Number	Distal Diameter (mm)	Endoprosthesis Length (cm)
PLC121000	12	10
PLC121200	12	12
PLC121400	12	14
PLC141000	14.5	10
PLC141200	14.5	12
PLC141400	14.5	14
PLC161000*	16	9.5
PLC161200*	16	11.5
PLC161400*	16	13.5
PLC181000*	18	9.5
PLC181200*	18	11.5
PLC181400*	18	13.5
PLC201000*	20	9.5
PLC201200*	20	11.5
PLC201400*	20	13.5
PLC231000*	23	10
PLC231200*	23	12
PLC231400*	23	14
PLC271000*	27	10
PLC271200*	27	12
PLC271400*	27	14

* PLEASE NOTE: All large diameter Contralateral Leg Endoprostheses (16, 18, 20, 23, 27 mm) can be used as Iliac Extenders.

Aortic Extender Endoprosthesis
Catalogue Number	Endoprosthesis Diameter (mm)	Endoprosthesis Length (cm)
PLA230300	23	3.3
PLA260300	26	3.3
PLA280300	28.5	3.3
PLA320400	32	4.5
PLA360400	36	4.5

Iliac Extender Endoprosthesis
Catalogue Number	Distal Diameter (mm)	Endoprosthesis Length (cm)
PLL161007	10	7
PLL161207	12	7
PLL161407	14.5	7

GORE® EXCLUDER® Iliac Branch Endoprosthesis Iliac Branch Component
Catalogue Number	Diameter Iliac End (mm)	Iliac Branch Component Length (cm)
CEB231010	10	10
CEB231210	12	10
CEB231410	14.5	10

Internal Iliac Component
Catalogue Number	Diameter Iliac End (mm)	Iliac Branch Component Length (cm)
HGB161007	10	7
HGB161207	12	7
HGB161407	14.5	7

GORE^® DrySeal Flex Introducer Sheath
Catalogue Number	Sheath Size (Fr)	Minimum Sheath ID (mm)	Nominal Sheath OD (mm)	Working Length (cm)
DSF1233	12	4.0	4.7	33
DSF1245	12	4.0	4.7	45
DSF1433	14	4.7	5.3	33
DSF1533	15	5.0	5.6	33
DSF1633	16	5.3	6.1	33
DSF1833	18	6.0	6.7	33
DSF2033	20	6.7	7.5	33
DSF2065	20	6.7	7.5	65
DSF2233	22	7.3	8.2	33
DSF2265	22	7.3	8.2	65
DSF2433	24	8.0	8.8	33
DSF2465	24	8.0	8.8	65
DSF2633	26	8.7	9.5	33
DSF2665	26	8.7	9.5	65

GORE® Tri-Lobe Balloon Catheter
Catalogue Number	Vessel Diameter (mm)
BCM1634	16–34

GORE® Molding & Occlusion Balloon
Catalogue Number	Balloon inflation range (mm)	Balloon length (cm)	Catheter length (cm)	Wire compatibility
MOB37	10-37	4	90	0.035

INDICATIONS FOR USE: Trunk-Ipsilateral Leg Endoprosthesis and Contralateral Leg Endoprosthesis Components. The GORE® EXCLUDER® AAA Endoprosthesis is intended to exclude the aneurysm from the blood circulation in patients diagnosed with infrarenal abdominal aortic aneurysm (AAA) disease and who have appropriate anatomy as described below: Adequate iliac ⁄ femoral access; Infrarenal aortic neck treatment diameter range of 19 – 32 mm and a minimum aortic neck length of 15 mm; Proximal aortic neck angulation ≤ 60° Iliac artery treatment diameter range of 8 – 25 mm and iliac distal vessel seal zone length of at least 10 mm. Aortic Extender Endoprosthesis and Iliac Extender Endoprosthesis Components. The Aortic and Iliac Extender Endoprostheses are intended to be used after deployment of the GORE® EXCLUDER® AAA Endoprosthesis. These extensions are intended to be used when additional length and ⁄ or sealing for aneurysmal exclusion is desired.
CONTRAINDICATIONS: The GORE® EXCLUDER® AAA Endoprosthesis is contraindicated in patients with known sensitivities or allergies to the device materials and patients with a systemic infection who may be at increased risk of endovascular graft infection. R_XOnly

Sizing, availability, and pricing varies by country.
Please check with your Gore representative for availability.

22797305-EN01